TrueData Bookmap works on Windows, and Mac. You can install TrueData Bookmap on as many computers as you want; however, it would work only on one system at a time.
These are the technical specifications required to successfully install and run TrueData Bookmap. Keep in mind that during a market activity spike all your trading software is likely to start consuming more CPU/RAM, so plan resources accordingly.
TrueData Bookmap for Windows:-
Minimum:
- TrueData Bookmap supports 64-bit operating system only
- Windows 8
- Minimum of 1280x960 display resolution
- Minimum of 8 GB RAM and 10 GB free disk space (The application itself takes ~500MB, but the cache requires a lot more storage)
- Intel Core i5 (or equivalent)
- Stable internet connection with minimum speed of 5 Mbit/sec
- A mouse with a middle button is required for the one-click trading add-on feature.
- .NET 3.5
Recommended for light use (no MBO, low resolution or limited depth data, no heavy software running in parallel):
- Windows 10
- Minimum of 1920x1080 display resolution
- Video card with a minimum of 1 GB memory supporting OpenGL 3.3. Ideally, a relatively modern one (released within the last 4 years).
- 16 GB RAM or more
- SSD for Bookmap data folder with 100 GB of free disk space
- Intel Core i7/AMD Ryzen 7 (or equivalent) or better. 4+ cores. Able to stay above 2.6GHz consistently.
- Stable internet connection with speed of at least 50Mbit/s.
- A mouse with a middle button is required for the one-click trading add-on feature.
- .NET 3.5
Recommended for heavy use (MBO, high resolution full depth data, e.g. Rithmic or some cryptocurrency providers):
- Windows 10 or above
- Minimum of 1920x1080 display resolution
- Modern video card with a minimum of 1 GB memory supporting OpenGL 3.3. Requirements go up as you connect more/bigger monitors.
- 32 GB RAM. More if you run other software in background.
- SSD for Bookmap data folder with 100 GB of free disk space. More if you want to keep more data loaded (e.g. leave Bookmap running for a week retaining data. Around 50GiB/day is usually enough, but depending on number of instruments you might want more)
- Modern Intel Core i9/AMD Ryzen 9 (or equivalent) or better. 8+ cores. Able to stay above 3GHz consistently.
- Stable internet connection with speed of at least 100Mbit/s and low package loss. Be careful with using WiFi or DOCSIS.
- A mouse with a middle button is required for the one-click trading add-on feature.
- .NET 3.5
1. Effective resolution (assuming scaling is set to 100%). For example 1920x1080 display meets the requirements with 100% display scaling, but does not meet the requirements if scaling is set to 150%, as resolution gets effectively divided by 1.5 in that case, becoming 1280x720. However you can tell system not to scale Bookmap by changing "Override high DPI scaling behavior" to "Application" under "Compatibility"->"Change high DPI settings" inside Bookmap shortcut properties.
2. Not to confuse cores and threads. There are 2 core 4 thread CPUs marketed as Core i7 line, e.g. 7500U - those are below recommended specification.
3. Keep in mind that even seemingly light software, like a browser, can end up consuming a lot of RAM and/or CPU depending on how you use it. Bookmap by itself should be fine with around ~8GiB of actually free ram, the only catch is making sure no other software ends up using it up.
4. Bookmap core by itself is unlikely to utilize more than 6 cores in most workloads at this point, however you might be running addons that can do it. Also other software, e.g. video encoding on CPU, could use up few cores.
5. With modern laptop CPUs frequency can be configured in wide range by manufacturer. Some laptops that seemingly have a decent processor have its base frequency configured very low (say 1.2GHz) due to power or thermal constraints. While such CPU might boost to "reasonable" 2.8GHz for short period of time it will often decrease frequency under constant load (such as when market gets volatile), thus losing performance when you need it the most.
Note, that you don't really need your CPU to maintain the required frequency in synthetic benchmarks, as those aren't very realistic (make CPU work "harder" than it has to in real-world tasks).
To download the Windows version:
- Use the direct link to start the download now
- Connect Bookmap with TrueData
TrueData Bookmap for macOS:-
Minimum:
- MacOS 10.11 or higher
- 4 GB RAM
Preferred:
- 16 GB RAM
- Graphics Card
Starting from the Mac 113 build, Bookmap should start without any gatekeeper trouble.
To download the latest Mac version:
- Visit User Portal,
- Join the macOS discussion Forum or
- Use the direct link to start the download now
Once download is complete, follow a regular DMG installation process:
- Double-click the .dmg to make its content available. Name will show up in the Finder sidebar. Usually a window opens showing the content as well
- Drag the application from the .dmg window into /Applications to install.
- Note: may require an administrator password.
If Bookmap does not start:
- Open Bookmap Logs location
- Open Finder, press CMD+SHIFT+G and paste:
<span style="background-color: rgb(255, 255, 0);">~/Library/Application Support/Bookmap/Logs/</span>
To find Bookmap Logs on MacOS:
- Start an application
- Go to Select File ⟶ Open user folder
To find external adapters on macOS:
- Go to Setting ⟶ Manage plugins
Adapters, currently available for macOS:
- Rithmic,
- dxFeed,
- CQG,
- IB,
- iqFeed,
- Cedro,
- Coinbase,
- OkCoin
Adapters that are currently NOT supported by macOS:
- Stage5,
- Gain,
- Ninja,
- XTrader,
- Transact